
A brand-new sending IP has no history, so mailbox providers watch its first messages closely. Send too much too soon and they throttle, filter, or block it. IP warmup is the process of increasing volume gradually so providers can build trust in the new address. This guide covers who actually needs it, dedicated versus shared IPs, sample schedules, which recipients to start with, when to pause, and how warming an IP differs from the domain and mailbox warm-up most cold email teams deal with.
A New IP Starts With Zero History
๐ก TL;DR
IP warmup means sending small, steady volumes from a new dedicated IP and raising them gradually โ commonly by about 25% every few days, or doubling over roughly 4โ8 weeks โ starting with your most engaged recipients and watching deferrals, bounces, and complaints at each step. You need it for new dedicated IPs at an email service or on your own servers. If you send through Google Workspace or Microsoft 365, you're warming domains and mailboxes, not IPs.
Zero. That's how much sending history a newly assigned IP address has. Mailbox providers can't tell yet whether it belongs to a careful sender or a spammer, so they start cautiously โ and they judge the first few weeks of traffic heavily.
Done well, a gradual ramp builds a reputation that supports full volume. Done badly โ a large first send to an old list โ and the new IP can be throttled or filtered before it ever proves itself.
By the end of this, you'll know exactly whether you need to warm an IP, how to plan it, and what to do when signals turn.
Who Actually Needs IP Warmup?
Setup | Need IP warmup? | What to warm instead |
|---|---|---|
New dedicated IP at an email service | Yes | โ |
Your own mail servers with new IPs | Yes | Also reverse DNS and authentication |
Shared IP pool at an email service | No โ the provider manages the pool | A new sending domain still needs a gradual ramp |
Google Workspace or Microsoft 365 mailboxes | No โ the platform runs the servers | Domains and mailboxes |
Dedicated IP that's been idle for a long time | Often yes โ reputation cools | โ |
Advice on when a dedicated IP is worth it varies between email services โ published thresholds range from around 50,000 emails a month to 50,000 a week of regular sending. Below steady volume, a dedicated IP has too little traffic to build a reputation, and a well-managed shared pool often performs better.
Cold email teams on Google Workspace or Microsoft 365 should focus on mailbox and domain warm-up instead โ see pre-warmed vs fresh inboxes and shared vs private email infrastructure.
Before the First Send
Warming goes much more smoothly when the basics are already in place.
Reverse DNS: Google's sender guidelines require sending IPs to have valid forward and reverse DNS.
Authentication: SPF covering the new IP, DKIM signing for your domain, and DMARC published โ see SPF configuration.
Monitoring: Google Postmaster Tools for your domain and Microsoft SNDS for the IP.
Segment your list by engagement so the first sends go to people most likely to open and reply.
Plan the schedule and get stakeholders to agree that full volume won't happen on day one.
Engagement segments matter more than people expect. Recipients who opened or replied in the last 30โ90 days are far likelier to engage again, and early positive engagement is what gives providers confidence in a new address. Save older, quieter contacts for the final weeks, or re-confirm them before they ever receive mail from the new IP.
That last point is often the hardest. Marketing calendars rarely wait, so set expectations early.
Sample Warming Schedules
Email services publish different schedules, but they follow two common patterns.
Pattern | How it works | Typical length |
|---|---|---|
Steady increments | Raise volume by about 25% at each step, holding each level for 2โ3 days | Several weeks |
Doubling | Roughly double daily volume at each step while signals stay healthy | About 4โ8 weeks to full volume |
Automated | Some email services ramp a new IP automatically, routing overflow through shared IPs | Often around 30 days |
An illustrative doubling schedule toward 100,000 messages a day might look like this โ adjust it to your own volumes and results.
Days | Daily volume (illustrative) | Audience |
|---|---|---|
1โ2 | 500 | Most engaged recipients only |
3โ4 | 1,000 | Most engaged |
5โ6 | 2,000 | Engaged |
7โ9 | 5,000 | Engaged |
10โ13 | 10,000 | Engaged plus recent |
14โ18 | 25,000 | Broader active audience |
19โ24 | 50,000 | Broader active audience |
25+ | Toward 100,000 | Full active list |
Here's the advice we'd push back on: "Follow the schedule exactly, whatever happens." The schedule is a plan; the signals decide. If deferrals or complaints rise, hold or step back โ the calendar doesn't matter.
Warm Each Major Mailbox Provider
Gmail, Microsoft, Yahoo, and others each form their own view of a new IP. A smooth ramp overall can still be too fast for one provider if most of your list sits there.
Split volume by provider and ramp each separately when one dominates your list.
Watch deferrals per provider โ a 4xx response from one provider means slow that provider down, not everyone.
Smaller domains on your list usually don't need their own ramp.
Keep sends steady day to day rather than in large bursts.
Check which providers dominate your list before you start โ a quick count of recipient domains is enough.
Throttling responses, such as Gmail's 421 4.7.28 deferrals, are explained in email throttling.
When to Hold, Step Back or Pause
Signal | Action |
|---|---|
Temporary deferrals (4xx) rising | Hold at the current volume until they clear |
Bounces above 2% | Pause; clean the list before continuing |
Spam complaints approaching 0.1% | Step back a level; review audience and content |
Postmaster reputation falling | Hold or step back; send only to the most engaged |
Blocklist listing | Pause; fix the cause and follow the removal process |
Thresholds follow Google's email sender guidelines and common practice. A short pause during the ramp costs days; pushing through bad signals can cost weeks.
Moving to a New IP Without Losing Delivery
Many teams warm a new IP because they're changing email services or adding capacity. A few habits keep the move smooth.
Run old and new side by side. Keep sending most mail through the existing, warmed setup while the new IP ramps up.
Move traffic in slices โ one mail stream, region, or segment at a time.
Keep transactional mail stable. Receipts and password resets shouldn't be part of an experiment; move them once the new address is proven.
Hold content steady. Changing templates, links, and volume at the same time makes it impossible to tell what caused a problem.
Keep notes of each day's volume and results so you can step back precisely if needed.
If your email service offers automated warming that overflows extra traffic through shared addresses, use it โ and leave the shared pool as the default until the new address has reached full volume.
IP Warmup vs Domain and Mailbox Warm-Up
Warming an IP | Domain and mailbox warm-up | |
|---|---|---|
What builds reputation | A sending IP | Your domain and individual mailboxes |
Who needs it | Dedicated IP senders | Everyone with a new domain or mailbox, including on Google Workspace and Microsoft 365 |
Typical tools | Email service schedules, segmentation | Gradual volume per mailbox, warm-up tools, or pre-warmed inboxes |
Typical cold email volume | Not usually relevant | Start around 15โ20 per inbox per day, rising to 25โ40 |
Most cold email teams never warm an IP โ they warm domains and mailboxes. Litemail pre-warmed inboxes arrive with 4+ weeks of sending history, SPF/DKIM/DMARC pre-configured, and dedicated US and EU IPs, so that warm-up period is largely done before you start. For daily volume guidance, see how sending limits affect cold email deliverability.
Skip the warm-up wait for outreach โ Litemail pre-warmed Google Workspace and Microsoft 365 inboxes arrive with 4+ weeks of sending history, SPF/DKIM/DMARC pre-configured, and dedicated US and EU IPs โ no IP or mailbox warm-up schedule to run yourself. See Pre-Warmed Inbox Plans โ About Litemail โ Litemail provides pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach, with automated DNS, dedicated US and EU IPs, and full admin access. Pre-warmed plans start at $39/month for 5 inboxes; add-on inboxes go as low as $4.99/inbox on the Scale plan. View pre-warmed inbox plans โ
Related reading: Email Throttling ยท Shared vs Private Email Infrastructure ยท Google Workspace vs Private SMTP ยท Pre-Warmed vs Fresh Inboxes
Key Takeaways
IP warmup builds reputation for a new dedicated IP by raising volume gradually.
Common patterns: about 25% increases held for 2โ3 days, or doubling over roughly 4โ8 weeks.
Start with your most engaged recipients and warm each major mailbox provider.
Set up reverse DNS, SPF, DKIM, DMARC, and monitoring before the first send.
Hold or step back when deferrals, bounces (over 2%), or complaints (near 0.1%) rise.
Google Workspace and Microsoft 365 senders warm domains and mailboxes, not IPs.
Frequently Asked Questions
What is IP warmup?
Gradually increasing the volume of email sent from a new IP address so mailbox providers can build trust in it before it carries full volume.
How long does it take to warm up an IP?
Commonly several weeks โ often around 4โ8 weeks for a doubling schedule, depending on target volume and how signals respond.
Do I need IP warmup on Google Workspace or Microsoft 365?
No. Those platforms run the sending servers. You warm your domains and mailboxes instead.
Who should receive the first sends on a new IP?
Your most engaged recipients โ people who recently opened, clicked, or replied โ then gradually broader segments.
Should I get a dedicated IP?
Only with steady, substantial volume. Email services publish different thresholds; below them, a well-managed shared pool often performs better.
What should I do if Gmail defers mail during warmup?
Hold at the current volume until deferrals clear, and check Postmaster Tools before increasing again.
Do Litemail inboxes need warming?
No. Litemail pre-warmed inboxes come with 4+ weeks of sending history and dedicated US and EU IPs, so there's no IP or mailbox warm-up schedule for you to run.
Warm-Up Already Done
Litemail pre-warmed inboxes come with sending history, SPF/DKIM/DMARC configured, dedicated US and EU IPs, and free domain replacement if a domain is ever blacklisted.
Plans from $39/month ยท Google Workspace and Microsoft 365 ยท Setup in about 5 minutes
Buy Pre-Warmed Email Inboxes & Domains | Litemail โ Pre-warmed Google Workspace and Microsoft 365 inboxes with automated DNS, US and EU IPs, and setup in about 5 minutes. Fresh inboxes from $2.50/inbox; pre-warmed from $4.99/inbox at scale. View plans and pricing โ
Related reading: Pre-Warmed Inboxes ยท Instantly Warmup Review 2026 ยท Cold Email Inbox Warmup Tips for Agencies ยท Cold Email Deliverability Guide ยท Litemail Home ยท Plans and Pricing


