
An email can be accepted by the receiving server and still never be seen — because it went to spam, a promotions tab, or quietly vanished into a filter. That gap between sent and seen is what email deliverability is about. This guide covers the whole picture: delivery versus inbox placement, the four pillars that decide where mail lands, the rules mailbox providers now enforce, how to measure placement, how it differs by email type, a 30-day improvement plan, and where to go deeper on each problem.
Delivered Isn't the Same as Seen
💡 TL;DR
Email deliverability is whether your messages reach the inbox, not just whether they're accepted. It rests on four pillars: authentication (SPF, DKIM, DMARC), sender reputation (domains and IPs), list quality and engagement (bounces under 2%, spam complaints under 0.1%), and sending behavior and content. Measure with Google Postmaster Tools, Microsoft SNDS, bounce and complaint data, and seed tests, and fix problems in that order — authentication first, content last.
Here's the direct version: a 99% delivery rate can hide a terrible inbox rate. Delivery only means the receiving server accepted the message instead of bouncing it. Where it went next — inbox, spam, or a tab nobody checks — is the part that decides whether anyone reads it.
Term | What it measures | What it misses |
|---|---|---|
Delivery rate | Messages accepted, not bounced | Whether they reached the inbox |
Inbox placement | Share that lands in the inbox rather than spam | Hard to measure exactly; estimated with seed tests and provider data |
Engagement | Replies, opens, clicks, complaints | Opens are unreliable due to automatic image loading |
By the end of this, you'll understand what drives inbox placement and have a plan to improve it, whatever kind of email you send.
The Four Pillars of Inbox Placement
🔐1. Authentication
SPF, DKIM, and DMARC prove you're allowed to send for your domain and that messages weren't altered. Without them, little else matters. See our SPF, DKIM, and DMARC guide and the DKIM guide.
⭐2. Reputation
Mailbox providers track how recipients react to mail from your domains and IPs. New domains and IPs start with little history — see IP warmup for dedicated IPs.
🧹3. List quality and engagement
Sending to valid, interested recipients keeps bounces and complaints low and engagement high.
📈4. Sending behavior and content
Steady volume, sensible limits, honest subject lines, and clean links. Sudden spikes trigger throttling — see email throttling.
Each pillar supports the next. Authentication lets providers attribute mail to you; attribution lets reputation build; reputation is then shaped by how your lists and recipients behave; and behavior and content are the day-to-day signals on top.
Fix them in this order. Great content can't overcome failed authentication, and perfect authentication can't overcome a bad list.
Domain Reputation vs IP Reputation
Reputation is the pillar people find hardest to picture, because nobody publishes the exact scores. What's clear is that providers look at more than one identity.
Identity | Who controls it | How it builds | Moves with you? |
|---|---|---|---|
Sending domain | You | Recipient reactions to mail authenticated with your domain over time | Yes — it's your domain |
Sending IP | Your email provider or you (dedicated IP) | Volume and complaints from that IP | Only if the IP is dedicated to you |
Link and tracking domains | You or your tool | Reactions to messages containing those links | Yes, if they're yours |
Mailbox / account | You, within the platform | Each account's own sending history | Within the same account |
For senders on Google Workspace or Microsoft 365, the platform runs the sending servers, so your domain carries most of the reputation you control. For senders with dedicated IPs through an email service or their own servers, IP reputation matters too — which is when IP warmup becomes part of email deliverability work.
The practical lesson: protect your domains above all. Keep risky streams on separate domains, and never let one campaign's complaints land on the domain your customers depend on. Good email deliverability is mostly about protecting those identities consistently, week after week. And because each identity builds slowly, the cheapest email deliverability strategy is to avoid damaging it in the first place — recovery takes far longer than prevention.
The Rules Mailbox Providers Now Enforce
Since 2024, the biggest mailbox providers have turned good practice into requirements for bulk senders.
Provider | Key requirements | Since |
|---|---|---|
Google (Gmail) | SPF, DKIM, DMARC; one-click unsubscribe for marketing; spam rate below 0.3% (aim under 0.1%); valid forward and reverse DNS for sending IPs | February 2024 for senders of 5,000+ daily messages to Gmail |
Yahoo | Similar authentication, unsubscribe, and complaint requirements | 2024 |
Microsoft (Outlook.com) | SPF, DKIM, and DMARC for high-volume senders | May 2025 |
Google's full list is in its email sender guidelines. Even if you send less than these thresholds, meeting them is the simplest way to stay on the right side of filters.
How to Measure Where Your Email Lands
No single tool shows your exact inbox rate. Combine several signals.
Signal | Source | What it tells you |
|---|---|---|
Spam complaint rate and domain reputation | Google Postmaster Tools | How Gmail users react to your mail |
IP-level signals for Outlook.com | Microsoft SNDS | How Microsoft sees your sending IPs |
Bounces and SMTP responses | Your sending platform's logs | Invalid addresses, blocks, and throttling |
Placement samples | Seed tests — see inbox placement tools | Where test messages land across providers |
Replies and conversions | Your CRM and sending tool | Whether real people engage |
Use seed tests as one signal, not the truth — test inboxes don't behave like real recipients. Before any big send, run the pre-flight checks in how to check email deliverability before launching.
How It Differs by Email Type
Email type | Main risks | What matters most |
|---|---|---|
Transactional (receipts, password resets) | Sharing reputation with marketing | Separate subdomain or stream; strict authentication |
Marketing to subscribers | Unengaged contacts, complaints | Consent, list hygiene, one-click unsubscribe |
Cold outreach | Higher complaint and bounce risk | Separate outreach domains, low per-inbox volume, verified lists |
One-to-one business email | Being dragged down by other streams | Keep the main domain away from bulk and cold mail |
Mixing these streams on one domain is one of the most common causes of problems. Cold outreach in particular should run on separate domains — see separating prospecting mailboxes from customer communication and how to stop cold emails going to spam.
Here's the advice we'd push back on: "Deliverability is mostly about avoiding spam trigger words." Content matters least of the four pillars. Authentication, reputation, and list quality decide far more.
A 30-Day Improvement Plan
Week | Focus | Actions |
|---|---|---|
1 | Authentication | Verify SPF (one record), DKIM per domain, DMARC at p=none with reports; fix anything failing |
2 | Lists | Verify addresses; remove hard bounces and long-unengaged contacts; confirm opt-out handling |
3 | Volume and separation | Smooth sending to steady daily levels; move cold or bulk mail off the main domain |
4 | Measurement | Set up Postmaster Tools and SNDS; run seed tests; agree weekly thresholds and alerts |
Don't change everything at once — one week per area makes it clear which change helped.
After the first month, the job becomes monitoring — see how to monitor email infrastructure health.
Common Problems and Where to Start
Symptom | Likely cause | Start here |
|---|---|---|
Everything suddenly goes to spam | Reputation drop, authentication break, or list problem | |
Temporary 4xx deferrals | Throttling for volume or unusual patterns | |
Users can't send any more today | Platform sending limit reached | |
Gmail fine, Outlook poor | Provider-specific reputation | |
New domain performs poorly | No sending history yet | Warm gradually; see how sending limits affect deliverability |
Litemail provides Google Workspace and Microsoft 365 inboxes with SPF/DKIM/DMARC pre-configured, dedicated US and EU IPs, and pre-warmed options with 4+ weeks of sending history — which covers the authentication pillar and much of the reputation pillar for outreach programs from day one.
Start with the pillars already in place — Litemail inboxes come with authentication configured on every domain, sending history on pre-warmed plans, dedicated US and EU IPs, and free domain replacement — so outreach starts on healthy foundations. See Pre-Warmed Inbox Plans → About Litemail — Litemail provides pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach, with automated DNS, dedicated US and EU IPs, and full admin access. Pre-warmed plans start at $39/month for 5 inboxes; add-on inboxes go as low as $4.99/inbox on the Scale plan. View pre-warmed inbox plans →
Related reading: Check Email Deliverability Before Launching · Inbox Placement Tools · Why Are My Emails Going to Spam? · Stop Cold Emails Going to Spam
Key Takeaways
Email deliverability is about inbox placement, not just delivery rate.
Fix the four pillars in order: authentication, reputation, list quality and engagement, then sending behavior and content.
Meet Google's, Yahoo's, and Microsoft's sender requirements even below their volume thresholds.
Keep bounces under 2% and spam complaints under 0.1% (never 0.3%).
Measure with Postmaster Tools, SNDS, bounce data, replies, and seed tests together.
Keep cold, marketing, transactional, and personal email on separate domains or streams.
Frequently Asked Questions
What is email deliverability?
Whether your emails reach recipients' inboxes rather than spam or other folders. It's different from delivery rate, which only counts messages accepted by the receiving server.
What affects inbox placement most?
Authentication, sender reputation, and list quality. Content matters, but less than these three.
How do I check my inbox placement?
Combine Google Postmaster Tools, Microsoft SNDS, bounce and complaint data, real engagement, and seed tests. No single source is complete.
What spam complaint rate is acceptable?
Under 0.1%, and never reaching 0.3%, per Google's sender guidelines.
Do the 2024 sender rules apply to small senders?
Google's strictest requirements apply to senders of 5,000+ daily messages to Gmail, but authentication and low complaint rates help everyone.
Does cold email need a different approach?
Yes. Use separate outreach domains, low per-inbox volume, verified lists, and steady sending, so cold outreach can't affect your main domain.
How does Litemail help with inbox placement?
Litemail inboxes come with SPF, DKIM, and DMARC configured, dedicated US and EU IPs, and pre-warmed options with sending history, so outreach starts on healthy infrastructure.
Healthy Infrastructure, From the First Send
Litemail Google Workspace and Microsoft 365 inboxes come with SPF/DKIM/DMARC configured, dedicated US and EU IPs, sending history on pre-warmed plans, and free domain replacement.
Plans from $39/month · Google Workspace and Microsoft 365 · Setup in about 5 minutes
Buy Pre-Warmed Email Inboxes & Domains | Litemail — Pre-warmed Google Workspace and Microsoft 365 inboxes with automated DNS, US and EU IPs, and setup in about 5 minutes. Fresh inboxes from $2.50/inbox; pre-warmed from $4.99/inbox at scale. View plans and pricing →
Related reading: Pre-Warmed Inboxes · Cold Email Infrastructure · Cold Email Infrastructure Setup · Reduce Cold Email Bounce Rate Below 2% · Litemail Home · Plans and Pricing


