
Microsoft 365 email throttling happens when Exchange Online slows, restricts or rejects outgoing mail because a mailbox or tenant has crossed a sending limit or looks like it is sending spam. It shows up as messages stuck in the Outbox, delayed delivery, "550 5.7.233" or "550 5.1.8" bounces, or a user suddenly listed on the Restricted entities page. Limits changed several times between 2024 and 2026 — including an announced per-mailbox external recipient limit that Microsoft cancelled in January 2026 — so many guides are now out of date. This guide sets out the current published limits, what each error means, how to unblock users, and how to run outreach from Microsoft 365 without being throttled.
Microsoft 365 Email Throttling: The Short Answer
Exchange Online applies per-mailbox limits (10,000 recipients per day, 30 messages per minute, 500 recipients per message by default) and a tenant-wide external recipient limit (TERRL) that scales with licences. Exceed them, or trip outbound spam detection, and Microsoft throttles, routes mail through a higher-risk pool, or restricts the user. Fix by finding the cause, removing restrictions in the Defender portal and spreading volume across dedicated outreach mailboxes at a steady pace.
Limit | Value | Notes |
|---|---|---|
Recipient rate limit (per mailbox) | 10,000 recipients / 24 hours | Sliding window; can't be increased |
Message rate limit (per mailbox) | 30 messages / minute | Excess submissions are throttled into later minutes |
Recipients per message | 500 (default) | Admins can set 1–1,000 |
Tenant External Recipient Rate Limit | Scales with licences | Trial tenants: 5,000 external recipients/day |
Mailbox External Recipient Rate Limit (2,000) | Cancelled | Microsoft cancelled it on 6 January 2026 |
Sources: Microsoft Learn's outbound sending limits troubleshooting, the Exchange Team's tenant outbound limits post and its cancellation notice.
The Three Kinds of Microsoft 365 Throttling
1. Rate throttling (per minute)
Send faster than 30 messages a minute from one mailbox and Exchange Online throttles the excess into following minutes. Usually harmless, but bursts from sequencers can cause delays — set send gaps as shown in our Smartlead setup guide.
2. Quota limits (per day)
Reach 10,000 recipients in 24 hours from one mailbox, or the tenant's external recipient quota, and further mail is rejected until the window clears. Tenant-level breaches return 550 5.7.233. Plan capacity with the pricing calculator.
3. Outbound spam restriction
If Microsoft's outbound spam filtering decides a user is sending spam, mail is routed through a high-risk delivery pool and the user may be restricted. Blocked users receive 550 5.1.8 and appear on the Restricted entities page; admins get a "User restricted from sending email" alert. This is the one that hurts cold email senders most, and it can happen far below the numeric limits.
Microsoft 365 Throttling Errors and What They Mean
Error / signal | Meaning | First step |
|---|---|---|
Delays, messages stuck briefly | Per-minute rate throttling | Slow sending pace |
550 5.7.233 | Tenant exceeded external recipient rate limit | Check Tenant Outbound External Recipients report |
550 5.1.8 | User restricted (bad outbound sender) | Check Restricted entities; investigate cause |
"User restricted from sending email" alert | Outbound spam policy action | Review account for compromise or bulk sending |
550 5.7.515 (from Outlook.com) | Your domain failed recipient-side authentication rules | Fix SPF/DKIM/DMARC — see error 550 5.7.515 |
Common Causes of Microsoft 365 Throttling
🚀Sudden volume spikes
A mailbox jumping to hundreds of external sends looks like abuse.
📬Bulk mail through user mailboxes
Microsoft states Exchange Online isn't designed for bulk mailing; outreach belongs on dedicated infrastructure.
🧾Bad lists
High bounce rates add to outbound spam signals; clean lists first (list cleaning guide).
🔓Compromised accounts
Attackers sending spam trigger restrictions; check sign-ins and forwarding rules.
🔐Weak authentication
Missing DKIM or DMARC on Microsoft 365 hurts placement (setup guide).
🧪Trial tenants
Trial tenants have a low external recipient limit (5,000/day).
How to Fix and Unblock a Throttled Microsoft 365 User
Confirm the cause. Read the NDR code and check the Restricted entities page in the Microsoft Defender portal.
Rule out compromise. Review sign-in logs, unknown inbox or forwarding rules and recent sent items; reset credentials and enforce MFA if anything looks wrong.
Stop the bulk send. Pause campaigns from the affected mailbox.
Remove the restriction. Follow Microsoft's steps to remove blocked users from the Restricted entities page once the cause is fixed.
Fix authentication and lists. Make sure SPF, DKIM and DMARC pass and lists are verified.
Resume slowly. Restart at low, steady volume and monitor.
For multi-client setups, our Microsoft 365 troubleshooting guide for agencies and Outlook troubleshooting fixes cover more scenarios.
How to Prevent Microsoft 365 Email Throttling
Keep per-mailbox volume low. For cold outreach, stay at a small fraction of 10,000/day; see how sending limits affect deliverability.
Pace sends. Configure your sequencer to stay well under 30 messages per minute with random gaps — Microsoft's own guidance for bulk is not to exceed 30/minute per mailbox.
Use separate outreach tenants and domains. Keep cold email off your company's main tenant (Microsoft 365 risks for SDRs).
Spread volume. More mailboxes at low volume beats a few at high volume; see how many inboxes you need and bulk inboxes.
Authenticate fully. SPF, DKIM (including the Defender toggle) and DMARC.
Set alerts. Microsoft suggests custom alerts before limits are reached — for example at 80% of TERRL.
Warm new mailboxes. Ramp gradually or use pre-warmed Microsoft 365 accounts.
Compare with Google's rules in Gmail sending limits, and see the general concept in email throttling.
What Changed in Microsoft 365 Limits (2024–2026)
Out-of-date articles are a major source of confusion about Microsoft 365 email throttling. Here is the timeline from Microsoft's own posts:
When | Change | Status |
|---|---|---|
April 2024 | Exchange Team announces a 2,000 external recipients/day per-mailbox limit (MERRL/ERR) | Delayed several times |
February 2025 | Tenant External Recipient Rate Limit (TERRL) introduced, scaling with licences | In force |
May 2025 | Outlook.com high-volume sender authentication requirements (SPF, DKIM, DMARC) | In force — causes 550 5.7.515 |
January 6, 2026 | Per-mailbox External Recipient Rate Limit cancelled indefinitely | Cancelled |
2026 | Recipient Rate Limit (10,000/day) and TERRL unchanged | In force |
If a guide tells you each mailbox is capped at 2,000 external recipients, it predates the cancellation. Plan around the 10,000 recipient rate limit, TERRL, and — most importantly for cold email — outbound spam detection. Teams moving from Google to Microsoft can compare in why Microsoft 365 for outbound, Microsoft 365 for link building outreach and Microsoft 365 for consulting firms, and check Microsoft 365 with Lemlist for sequencer setup.
Microsoft 365 Inboxes Built for Outreach
LiteMail | Microsoft 365 for cold email
Fresh from $2.50/inbox
Dedicated outreach mailboxes, authenticated and paced across many inboxes
LiteMail provisions official Microsoft 365 inboxes on your secondary domains, separate from your company tenant, with SPF, DKIM and DMARC configured automatically and dedicated US and EU IPs. Plans include many inboxes so each sends a small daily volume, and bulk OAuth export connects them to Instantly, Smartlead or Lemlist. Pre-warmed Microsoft 365 accounts are available when you need to start faster.
Strengths | Keep in mind |
|
|
Deciding between providers? See Google Workspace vs Microsoft 365, Microsoft 365 pros and cons and pre-warmed vs DIY Outlook setup.
Run Outlook outreach from dedicated, authenticated Microsoft 365 inboxes. Get Pre-Warmed Inboxes →
Frequently Asked Questions
What is Microsoft 365 email throttling?
It is when Exchange Online slows, limits or blocks outgoing email from a mailbox or tenant that exceeds sending limits or appears to send spam. Compare with Gmail sending limits.
What are the Microsoft 365 sending limits?
10,000 recipients per mailbox per 24 hours, 30 messages per minute, 500 recipients per message by default, plus a tenant external recipient limit that scales with licences.
Is the 2,000 external recipient limit still coming?
No. Microsoft cancelled the Mailbox External Recipient Rate Limit on 6 January 2026. The 10,000 recipient rate limit and tenant-level limit remain.
What does 550 5.7.233 mean?
Your tenant exceeded its daily limit for sending email to external recipients (the Tenant External Recipient Rate Limit).
What does 550 5.1.8 mean?
The sender has been restricted, typically after Microsoft suspected outbound spam. The user appears on the Restricted entities page. See how LiteMail Microsoft 365 inboxes are set up for a separate-tenant approach.
How do I unblock a restricted Microsoft 365 user?
Fix the cause (compromise or bulk sending), then remove the user from the Restricted entities page in the Microsoft Defender portal.
Can I increase Microsoft 365 sending limits?
The recipient and message rate limits are hard limits that can't be increased. Microsoft recommends dedicated bulk services for high-volume email; for cold outreach, scale across more mailboxes (network sizing).
How do I send cold email from Microsoft 365 without throttling?
Use separate outreach mailboxes and domains, keep per-mailbox volume low, pace sends, authenticate fully and spread volume across many inboxes. See Microsoft 365 tips for agencies.
Keep Microsoft 365 Outreach Under Every Limit
Dedicated Microsoft 365 and Google Workspace inboxes with automated SPF, DKIM and DMARC on dedicated US and EU IPs — fresh or pre-warmed.
Separate outreach mailboxes · Automated DNS · Bulk OAuth export
About LiteMail — LiteMail provides fresh and pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach, with automated SPF, DKIM and DMARC setup, dedicated US and EU IPs, separate client workspaces and one-click OAuth export to Instantly, Smartlead, Lemlist and other sending tools. View pre-warmed inbox plans →
Related reading: Microsoft 365 Cold Email Setup · Microsoft 365 Setup Mistakes · Microsoft 365 Risks for SDRs · LiteMail Microsoft 365 Inboxes Explained · Safe Sending Limits · Pre-Warmed Microsoft 365


