Article

Content

Mailforge Review 2026: Pricing, Features, Pros & Cons

Mailforge Review 2026: Pricing, Features, Pros & Cons

Mailforge Review 2026: Pricing, Features, Pros & Cons

Summarize with
Book more meetings with pre-warmed mailboxesReady-to-send Google & Microsoft inboxes in 5 minutes. US/EU IPs. No warmup wait.Get pre-warmed inboxes
4.8on G2
4.5on Trustpilot
Add as a preferred source on Google
Table Of Contents

Scanning page for headings…

Mailforge is Salesforge’s shared-IP SMTP mailbox service at about $3 per mailbox. This review explains the Forge family, real monthly bills at 10–200 mailboxes, the shared-IP trade-off, alternatives and a setup plan.

Stop Losing Emails to Spam — Get Pre-Warmed Inboxes
Ready to send from day 1. No warm-up wait. No extra tools needed.
Find Your Sending Domains →
100,000+ mailboxes · US & EU IPs · From $4.99/inbox

💡 TL;DR

Mailforge is Salesforge’s shared-IP SMTP mailbox service. It costs about $3 per mailbox per month with a 10-slot minimum ($30 floor), less on annual billing or at volume, plus $14/year .com domains. Mailforge advertises 200 mailboxes for about $484/month versus roughly $1,680 on Google Workspace directly. You trade some placement and IP isolation for that saving. Good for budget scaling inside the Salesforge stack; pair it with strict list hygiene and 2–3 mailboxes per domain.

200 mailboxes for about $484 a month, or about $1,680 on Google Workspace directly. That’s the comparison Mailforge leads with, per SendKit’s 2026 breakdown. A 71% saving is hard to ignore when you’re scaling outbound.

But a saving is only real if the two things are comparable. Mailforge mailboxes aren’t Google Workspace accounts. They’re SMTP mailboxes on shared IP pools, run by Salesforge. Different product, different behavior, different risks.

This mailforge review explains what you get for $3, where the price climbs, and how to decide between Mailforge, its sibling Infraforge and real Google or Microsoft inboxes. We run Litemail, a competitor, and we also maintain a Mailforge alternative page, so we’ve kept to published numbers here.

By the end of this, you’ll know exactly what Mailforge costs at your size and when that saving is worth it.

Stop Losing Emails to Spam — Get Pre-Warmed Inboxes
Ready to send from day 1. No warm-up wait. No extra tools needed.
Find Your Sending Domains →
100,000+ mailboxes · US & EU IPs · From $4.99/inbox

Mailforge in One Paragraph

Mailforge sells cold email mailboxes on shared infrastructure. You buy mailbox “slots,” register domains, and Mailforge sets up DNS — SPF, DKIM and DMARC — automatically. Mailboxes connect to any sequencer over SMTP. It sits at the budget end of Salesforge’s “Forge” family.


Forge product

Mailbox type

IP model

Rough price

Mailforge

SMTP

Shared pools

$2–$3/mailbox

Infraforge

SMTP

Dedicated IPs ($99/month each)

$3–$4/slot + IP

Primeforge

Google Workspace and Microsoft 365

Google’s and Microsoft’s ranges

Per seat


So the Forge family is a ladder. Start on Mailforge, move to Infraforge when you need IP isolation, or use Primeforge when you want real Google or Microsoft accounts. SendKit notes the Mailforge-to-Infraforge move is an in-account upgrade.

Need pre-warmed inboxes ready today? Litemail delivers Google Workspace & Microsoft 365 mailboxes with weeks of warm-up history built in.Check Available Domains →

Mailforge Pricing, Line by Line

Pricing is where this mailforge review starts in earnest. Here’s the pricing as reported across several 2026 sources. Most agree on the core numbers; a few details vary.


Item

Price

Notes

Mailbox slot

~$3/month

10-slot minimum, so a $30/month floor

Annual billing

~17% off

Roughly two months free

Bulk rate

As low as ~$1.67–$2

At high volume, per ToolQuestor and SendKit

.com domain

$14/year

Billed separately; DNS setup free

SSL and domain masking

Included or ~$2/domain/month

Sources disagree — confirm on your plan


The masking line is the one to check. Some 2026 write-ups describe SSL and domain masking as included; others list it as a $2 per domain monthly add-on. At 30 domains, that’s a $60 a month difference.

Now the worked bills, assuming 3 mailboxes per domain and monthly billing.


Mailboxes

Slots

Domains (monthly share)

Masking if $2/domain

≈ Total

≈ Per mailbox

10

$30

4 × $14/12 = $4.67

$8

$42.67

$4.27

50

$150

17 × $14/12 = $19.83

$34

$203.83

$4.08

200

$600

67 × $14/12 = $78.17

$134

$812.17

$4.06


So without masking and on bulk rates, Mailforge approaches its advertised $484 for 200 mailboxes. With masking billed and monthly pricing, it lands nearer $800. Ask which applies before you compare against anyone else.

Litemail's pre-warmed Google Workspace & Microsoft 365 inboxes come with US/EU IPs, automated DNS, full admin access, and 4–12 weeks of warm-up history — all from $4.99/inbox. No separate warm-up tool needed.

The Shared-IP Trade-Off, Honestly

Every mailforge review comes back to this. Your mailboxes share IP addresses with other Mailforge customers. Their behavior affects your reputation, and yours affects theirs.

That isn’t automatically bad. A well-managed shared pool has steady volume and a mix of senders, which can look healthier than a quiet dedicated IP. The risk is the bad neighbor: one customer blasting a dirty list can drag the pool down for a while.



Shared IP (Mailforge)

Dedicated IP (Infraforge)

Google/Microsoft accounts

Cost

Lowest

Higher (+$99/IP)

Highest per seat

Who controls reputation

Everyone on the pool

Only you

Google/Microsoft + you

Bad-neighbor risk

Yes

No

Low

Best for

Budget scaling

High-volume isolation

Placement-sensitive outreach


There’s a monitoring answer too. Ask Mailforge how it handles a pool that picks up a blocklist listing, and how quickly affected mailboxes move. A provider with a clear process turns a bad-neighbor week into a short dip instead of a lost month.

Our rule of thumb: shared IPs are fine when your offer works at volume and you can absorb the odd bad week. If each prospect is valuable — enterprise sales, small target lists — pay for isolation or provider accounts.

Mailforge vs the Usual Alternatives

Most people reading a mailforge review are choosing between a handful of options. Here they are, side by side, using public 2026 figures.


Provider

Mailbox type

Typical price

Minimum

Standout

Mailforge

Shared SMTP

$2–$3

10 slots

Cheapest entry; masking

Maildoso

Shared SMTP (+ Google bundle)

~$1.80–$3.10

20 monthly / 32 quarterly

Auto-Heal, 4.6 on G2

Infraforge

SMTP, dedicated IP

$3–$4 + $99/IP

10 slots

IP isolation

Smartlead SmartSenders

Mailboxes inside Smartlead

$4.50–$9

Platform plan

One-stop buying

Litemail pre-warmed

Google and Microsoft

$4.99

None

Warm on arrival


Mailforge’s best argument is its entry point. $30 a month for 10 mailboxes is one of the cheapest ways to start sending at all. Its weakest argument is placement-sensitive outreach, where provider accounts usually do better.

Here’s a scenario. A founder testing a new offer wants 10 mailboxes and a month of data. Mailforge at $30 plus domains is a sensible, low-risk test. If the offer works and the founder scales to a few hundred mailboxes, that’s the moment to reconsider the shared-IP trade-off.

Start Sending Cold Email Today — Not in 6 Weeks
Pre-warmed Google Workspace & Microsoft 365 inboxes. Automated DNS. US & EU IPs. From $4.99/inbox.
See Domains Ready to Send →
No credit card required · Setup in 5 minutes · Cancel anytime
Start Sending Cold Email — Pre-warmed inboxes from $4
Get Inboxes

What a Full Mailforge Stack Costs at 50 Mailboxes

The mailbox bill is only part of the stack. This mailforge review adds the other pieces for a 50-mailbox setup sending about 750 emails a day.


Item

≈ Monthly cost

Notes

50 Mailforge slots

$150

Monthly billing at ~$3

17 domains

$19.83

$14/year each

Masking (if billed)

$34

$2/domain/month

Sequencer

$37–$100

Instantly or Smartlead, warm-up included

List verification (22,500 contacts)

$45–$450

At about $2–$20 per 1,000


All in, that’s roughly $285 to $750 a month, depending mostly on verification. Compare that against Google Workspace bought directly at around $7 per user per month for Business Starter, per Bitscale’s 2026 review: 50 seats is about $350 before domains or tools.

So Mailforge’s saving is real but narrower than the headline once everything is included. The biggest swing factor isn’t the mailbox price at all. It’s list quality, because a bad list will burn shared-IP mailboxes and Google accounts alike.

That’s the part of this mailforge review we’d underline. If you only have budget to do one thing well, verify the list. Cheap infrastructure on a clean list beats premium infrastructure on a dirty one.

Get Fresh Email Inboxes — Set Up in 30 Minutes
Real Google Workspace and Microsoft 365 accounts on your domains. Automated DNS, SPF, DKIM and DMARC included.
Find Your Sending Domains →
Starts at $2.50/inbox · Automated DNS · No manual setup

Getting Mailforge Right: 7 Steps

Shared infrastructure rewards discipline. Here’s the setup we’d run.

  1. Buy fresh .com domains for outreach only, at $14 a year each.

  2. Keep 2–3 mailboxes per domain, not more, to limit damage if one domain is flagged.

  3. Confirm SPF, DKIM and DMARC on each domain with a free checker.

  4. Confirm whether masking is included on your plan before you add it.

  5. Warm for 14–21 days through your sequencer or a warm-up tool.

  6. Connect to Instantly, Smartlead or Salesforge and cap at 15–20 sends per mailbox per day.

  7. Verify every list and keep bounce rate under 2%, ideally under 1%.

What to do if placement drops across many mailboxes

When many mailboxes drop at once, suspect the shared pool. Contact support and ask whether the IPs have a known issue. Meanwhile, cut volume by half and check your own bounces and complaints. If the pool keeps misbehaving and your numbers are clean, that’s the case for moving up to Infraforge or provider accounts.

Keep compliance steady: every US email needs a physical address and working opt-out under CAN-SPAM.

Mailforge Review Verdict

Here’s the summary of this mailforge review. Mailforge is a cheap, well-connected way into cold email infrastructure, especially if you already use Salesforge. The price is real; so is the shared-IP trade-off.


Buyer

Our call

Founder testing an offer

Good, cheap starting point

Salesforge user scaling volume

Natural fit; upgrade to Infraforge later

Agency with placement-sensitive clients

Consider provider accounts

Team needing Google Workspace

Look at Primeforge or a reseller


If you’d rather start with Google or Microsoft inboxes that are already warm, compare the ranked pre-warmed providers. Litemail’s pre-warmed inboxes cost $4.99/inbox/month with dedicated US and EU IPs. That’s the bottom line of this mailforge review: cheapest way in, with trade-offs you should plan for.

Stop Losing Emails to Spam — Get Pre-Warmed Inboxes
Ready to send from day 1. No warm-up wait. No extra tools needed.
Find Your Sending Domains →
100,000+ mailboxes · US & EU IPs · From $4.99/inbox

📚 More Cold Email Infrastructure Reviews

Each review in this series follows one rule: vendor-published facts first, outside claims named and attributed, competitor-written sources labeled as such. Keep comparing before you buy.

Ready to Move Beyond Shared SMTP? — Shared pools are cheap; provider accounts and dedicated IPs buy you control. Litemail pre-warmed inboxes come with full admin access, dedicated US and EU IPs and SPF, DKIM and DMARC already set, from $4.99/inbox. Connect to Instantly, Smartlead or Lemlist via OAuth in about 3 minutes. No lock-in, so your infrastructure survives any platform decision you make later. Get Pre-Warmed Inboxes from $4.99 → Works with Instantly via OAuth · Full admin access · Dedicated US and EU IPs · No minimum order
About Litemail — Litemail provides pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach. From $4.99/inbox with automated DNS, dedicated US and EU IPs, and full admin access. View pre-warmed inbox plans →

Related reading: Mailforge Alternative · Infraforge Review 2026 · Maildoso Review 2026 · Best Pre-Warmed Inbox Providers 2026 (Ranked) · Litemail Pre-Warmed Inboxes — Plans and Pricing

Key Takeaways

  • Mailforge sells shared-IP SMTP mailboxes at about $3 each per month with a 10-slot minimum ($30 floor).

  • Annual billing saves about 17%, and bulk rates fall to around $1.67–$2 per mailbox.

  • Domains cost $14/year; SSL and masking may be included or $2/domain/month, so confirm on your plan.

  • 200 mailboxes cost about $484/month on Mailforge’s own comparison, or nearer $800 with masking and monthly billing.

  • Shared IPs bring bad-neighbor risk, so keep 2–3 mailboxes per domain and bounces under 2%.

  • Upgrade to Infraforge for dedicated IPs, or Primeforge for Google and Microsoft accounts, when you outgrow it.

Frequently Asked Questions

How much does Mailforge cost?

About $3 per mailbox per month with a 10-slot minimum, so $30/month to start. Annual billing saves around 17%, and bulk rates go lower.

Is Mailforge Google Workspace?

No. Mailforge sells SMTP mailboxes on shared IPs. Salesforge’s Primeforge sells Google Workspace and Microsoft 365 mailboxes.

Does Mailforge include domains?

No. Domains cost about $14 a year each, with DNS setup included.

Is domain masking included with Mailforge?

Sources disagree. Some say it’s included; others list it at $2 per domain per month. Check your plan.

What does this mailforge review recommend?

Use Mailforge for low-cost testing and budget scaling. Keep 2–3 mailboxes per domain and move to dedicated IPs or provider accounts if placement matters most.

What’s the difference between Mailforge and Infraforge?

Mailforge uses shared IPs and is cheaper. Infraforge adds dedicated IPs at $99 a month each for reputation isolation.

Does Mailforge work with Instantly?

Yes. Mailforge mailboxes connect over SMTP to Instantly, Smartlead, Salesforge and other sequencers.

How does Litemail compare to Mailforge?

Mailforge is cheaper per mailbox. Litemail sells pre-warmed Google Workspace and Microsoft 365 inboxes at $4.99 with no warm-up wait and no shared SMTP pool.


Buy Pre-Warmed Email Inboxes & Domains | Litemail

Prefer provider accounts over a shared SMTP pool? Buy pre-warmed email accounts, inboxes and domains from $4.99/inbox. Google Workspace & Microsoft 365. Automated DNS, US & EU IPs. Setup in 5 minutes.

View Plans & Pricing →

No minimum order · Postmaster-verified reputation within 48 hours · US and EU IPs included

Related reading: Cold Email Infrastructure · Pre-Warmed Domains · Google Workspace Inboxes · Outlook Subject Line Display Guide · Litemail vs Infraforge

Book more meetings with pre-warmed mailboxesReady-to-send Google & Microsoft inboxes in 5 minutes. US/EU IPs. No warmup wait.Get pre-warmed inboxes
4.8on G2
4.5on Trustpilot
Add as a preferred source on Google

Share

Share LiteMail automated email setup on Twitter (X)
Share LiteMail email marketing growth strategies on Facebook
Share LiteMail inbox placement and outreach analytics on LinkedIn
Share LiteMail cold email infrastructure on Reddit
Share LiteMail affordable business email plans on Pinterest
Share LiteMail deliverability optimization services on Telegram
Share LiteMail cold email outreach tools on WhatsApp
Share Litemail on whatsapp
FREESearch pre-warmed domains for freeReady-to-send inboxes that land in the inbox, not spam.Search now
FREESearch pre-warmed domains for freeReady-to-send inboxes that land in the inbox, not spam.Search now
FREESearch pre-warmed domains for freeReady-to-send inboxes that land in the inbox, not spam.Search now