
Mailgun is a transactional email API with a free plan and plans from $15 a month. This review covers pricing, what its acceptable use policy says about third-party lists, how it compares with SendGrid and SES, and what to use for cold outreach.
💡 TL;DR
Mailgun (by Sinch) is a transactional email API: free up to 100 emails a day, then $15/month for 10,000, $35 for 50,000 and $90 for 100,000, with custom Enterprise above. Its acceptable use policy prohibits acquiring or sending to third-party lists — bought, rented or scraped — and requires consent. That rules out typical cold outreach. Use it for product email; run prospecting on separate mailboxes and a sequencer.
“Acquiring or sending to a third-party mailing list is prohibited.” That sentence is from Mailgun’s own acceptable use policy, and it settles the question most people bring to a mailgun review: can I use it for cold email? Not for the way most cold outreach works.
That doesn’t make Mailgun a bad product. It’s a capable, developer-friendly email API, and it’s very good at the job it’s built for: sending application email reliably at scale.
This mailgun review covers pricing, what the policy actually says, and what to use for cold outreach instead. We run Litemail, which sells cold email inboxes, so we’ve kept Mailgun’s policy wording close to the source.
By the end of this, you’ll know exactly where Mailgun fits and where it doesn’t.
Mailgun Pricing
Per Mailgun’s pricing page, as summarized by Modern Inbound in October 2026, here are the published plans.
Plan | Price | Emails included |
|---|---|---|
Free | $0 | 100 emails/day |
Paid entry | $15/month | 10,000/month |
Mid | $35/month | 50,000/month |
Higher | $90/month | 100,000/month |
Enterprise | Custom | Above that |
Overage rates on paid plans run roughly $1.10–$1.80 per 1,000 extra emails depending on plan, per a September 2026 comparison. Mailgun’s free plan doesn’t expire, which it contrasts with SendGrid’s 60-day trial.
What Mailgun’s Policy Says
This is the most important section of this mailgun review. Mailgun’s acceptable use policy is direct.
Policy point | What it means for cold email |
|---|---|
Acquiring or sending to third-party mailing lists is prohibited | Bought or rented B2B lists are off-limits |
Lists bought, rented or scraped from third parties are prohibited | Scraped prospect lists are off-limits |
Consent expected before sending | Cold outreach to non-opted-in contacts conflicts with the policy |
Validating purchased lists is also restricted | You can’t use Mailgun to clean bought lists either |
Most cold outreach relies on lists built from databases or research — exactly what the policy restricts. Modern Inbound’s summary says it plainly: the policy works against how cold outbound operates.
Breaking an acceptable use policy usually means account suspension. As with any API that also carries product email, that can take your transactional sending down with it.
What Mailgun Does Well
For application email, Mailgun has real strengths.
🔌Developer-friendly API
Clean API and SMTP relay for app-generated email.
📊Logs and analytics
Longer retention than some competitors, per a 2026 comparison.
🧪Testing tools
Email testing and reputation checks.
📈Predictable pricing
Volume-based plans with published overage rates.
If you need to send receipts, password resets, notifications or opt-in newsletters, Mailgun is a solid choice.
Mailgun vs SendGrid vs Amazon SES
These three come up together. Here’s how this mailgun review compares them for the jobs they’re built for.
Mailgun | SendGrid | Amazon SES | |
|---|---|---|---|
Entry paid price | $15/month | $19.95/month (Email API) | Pay as you go |
Free option | 100/day, no expiry | 60-day trial, 100/day | 3,000/month first year |
Best for | Developer-focused app email | App email plus marketing | Lowest cost at scale on AWS |
Cold email allowed? | No — AUP bans third-party lists | No — consent required | No — unsolicited prohibited |
All three share the same answer for cold email. Choose between them on developer experience, price and ecosystem.
What to Use for Cold Outreach
Cold outreach needs a different stack: real mailboxes on secondary domains, a sequencer, and careful volume.
Buy secondary domains separate from your product email domain.
Set up Google Workspace or Microsoft 365 inboxes, 2–3 per domain.
Connect a sequencer like Instantly or Smartlead.
Verify every list and keep bounces under 2%.
Include a clear opt-out in every email.
Litemail’s pre-warmed inboxes cost $4.99/inbox/month and connect via OAuth. Keep Mailgun for product email.
Scenario: Keeping Product Email Safe
Picture a 3-person SaaS team that already sends signup confirmations and invoices through Mailgun. They want to start cold outreach.
Option | Risk |
|---|---|
Send cold email through Mailgun | Policy breach; possible suspension of all product email |
Send cold email from the main domain’s Google account | Complaints hit the main domain’s reputation |
Separate domains + inboxes + sequencer | Product email and cold outreach fully isolated |
Only the third option protects the business. It costs a little more, and it means a bad campaign never touches a customer’s invoice.
Already on Mailgun? Add Cold Outreach the Safe Way
Many teams reading this mailgun review already send product email through Mailgun. Here’s how to add cold outreach without risking it.
Leave Mailgun untouched for transactional and opt-in email.
Register separate domains for outreach — not subdomains of your product domain.
Set up Google Workspace or Microsoft 365 inboxes on those domains.
Connect them to a sequencer such as Instantly or Smartlead.
Monitor both streams separately in Google Postmaster Tools.
Using separate root domains, not subdomains, keeps reputation fully isolated. A complaint spike on an outreach domain then can’t spill onto the domain your customers rely on for receipts and resets.
This mailgun review sees that separation as the single most valuable step for any company sending both kinds of email.
Compliance Basics That Apply to Every Provider
Infrastructure choices don’t change the rules. Whatever you buy, these basics decide whether your domains survive.
Rule | Threshold or requirement |
|---|---|
Spam complaints | Under 0.1%, never above 0.3% (Google sender guidelines) |
Bounce rate | Under 2% |
Authentication | SPF, DKIM and DMARC passing on every domain |
US law | Physical address and a working opt-out in every email |
EU contacts | A lawful basis under GDPR and an easy way to object |
CAN-SPAM covers the US requirements; GDPR covers EU contacts. Neither cares how cheap your inboxes were.
In practice, most deliverability problems blamed on providers trace back to these basics. Fix them first, and provider differences matter far less.
Mailgun Review Verdict
Mailgun is a strong transactional email API with a free plan, clear pricing and good developer tools. Its own policy rules out typical cold outreach.
Use case | Our call |
|---|---|
Transactional and app email | Strong fit |
Opt-in newsletters | Good fit |
Cold outreach to bought or scraped lists | Prohibited |
Teams wanting a free plan that doesn’t expire | Good fit |
For cold outreach, compare the ranked pre-warmed inbox providers. That’s our mailgun review: great API, wrong tool for prospecting.
📚 More Cold Email Infrastructure Reviews
Each review in this series follows one rule: vendor-published facts first, outside claims named and attributed, competitor-written sources labeled as such. Keep comparing before you buy.
SendGrid Review 2026 — Twilio’s email API and its consent rules
Halon Review 2026 — enterprise MTA software, not an inbox provider
AgentMail Review 2026 — email inboxes built for AI agents
Winnr Review 2026 — SMTP mailboxes from $1.38 with optional dedicated IPs
wizeMails Review 2026 — managed dedicated infrastructure from $179
Keep Product Email and Prospecting Separate — Run cold outreach on dedicated, warmed inboxes — never through your transactional API. Litemail pre-warmed inboxes come with full admin access, dedicated US and EU IPs and SPF, DKIM and DMARC already set, from $4.99/inbox. Connect to Instantly, Smartlead or Lemlist via OAuth in about 3 minutes. No lock-in, so your infrastructure survives any platform decision you make later. Get Pre-Warmed Inboxes from $4.99 → Works with Instantly via OAuth · Full admin access · Dedicated US and EU IPs · No minimum order
About Litemail — Litemail provides pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach. From $4.99/inbox with automated DNS, dedicated US and EU IPs, and full admin access. View pre-warmed inbox plans →
Related reading: Amazon SES Review 2026 · SendGrid Review 2026 · Cold Email Legal Risks 2026 · Best Pre-Warmed Inbox Providers 2026 (Ranked) · Litemail Pre-Warmed Inboxes — Plans and Pricing
Key Takeaways
Mailgun is a transactional email API: free up to 100 emails a day, then $15, $35 and $90 a month.
Its acceptable use policy prohibits acquiring or sending to bought, rented or scraped lists.
That rules out typical cold outreach; violations risk account suspension.
Suspension would also stop your product email, so never mix the two.
Run cold outreach on secondary domains, real inboxes and a sequencer.
Mailgun, SendGrid and Amazon SES all prohibit cold email in their policies.
Frequently Asked Questions
How much does Mailgun cost?
There’s a free plan for 100 emails a day. Paid plans start at $15/month for 10,000 emails, then $35 for 50,000 and $90 for 100,000.
Can I use Mailgun for cold email?
Not for typical cold outreach. Its policy prohibits sending to bought, rented or scraped lists.
Who owns Mailgun?
Mailgun is part of Sinch, whose email services are governed by Mailgun’s acceptable use policy.
Does Mailgun’s free plan expire?
No, according to Mailgun’s comparison with SendGrid.
What is Mailgun good for?
Transactional and application email, such as receipts, password resets and notifications, plus opt-in newsletters.
What does this mailgun review recommend?
Use Mailgun for product email and a separate mailbox-plus-sequencer stack for cold outreach.
Is Mailgun better than SendGrid?
They’re close on core delivery. Mailgun has a non-expiring free plan; SendGrid bundles marketing tools.
Can Litemail inboxes work alongside Mailgun?
Yes. Use Litemail’s pre-warmed inboxes for cold outreach on separate domains and keep Mailgun for transactional email.
Buy Pre-Warmed Email Inboxes & Domains | Litemail
Prospecting? Use inboxes built for cold outreach. Buy pre-warmed email accounts, inboxes and domains from $4.99/inbox. Google Workspace & Microsoft 365. Automated DNS, US & EU IPs. Setup in 5 minutes.
No minimum order · Postmaster-verified reputation within 48 hours · US and EU IPs included
Related reading: Cold Email Infrastructure · Pre-Warmed Domains · Google Workspace Inboxes · Outlook Subject Line Display Guide · Cold Email Compliance Checklist 2026


