
An IP warming schedule is the plan for increasing daily volume on a new dedicated IP until it can carry your normal load. Mailbox providers have no history for a new IP, so a sudden flood of mail looks like a spammer on a fresh address. For cold email — where engagement is naturally lower than for opted-in marketing — the ramp needs to be more conservative than typical ESP guidance. This guide gives a sample four-week dedicated IP ramp for cold outreach, the signals to watch each day, how to adjust, and when you don't need IP warming at all.
IP Warming Schedule: The Short Answer
Start small — tens to low hundreds of messages per day from the new IP.
Send first to your best-fit, verified, most likely to engage contacts.
Increase in steps every few days only while bounces, deferrals and complaints stay low.
Spread volume across several domains and inboxes on the IP.
Hold or step back at the first sign of deferrals or spam placement.
💡 Do you even need it?
If you send from Google Workspace or Microsoft 365 inboxes, you don't warm IPs — the providers own them. You warm inboxes and domains instead (email warmup vs IP warming).
Sample 4-Week Dedicated IP Ramp for Cold Email
Illustrative schedule, not an official provider rule. Target: about 2,000 cold emails per day from one dedicated IP, spread across multiple warmed domains and inboxes.
Week | Daily volume (approx.) | Who to send to | Move up only if… |
|---|---|---|---|
Week 1 | 50 → 200 | Most engaged, verified, high-fit contacts | Bounces very low, no deferrals |
Week 2 | 250 → 500 | Best segments | No spam placement in tests |
Week 3 | 600 → 1,000 | Broader verified segments | Deferrals stay rare |
Week 4 | 1,200 → 2,000 | Normal campaigns | Replies steady, complaints low |
Google's sender guidelines stress consistent sending and authentication; Microsoft data for your IP is in Microsoft SNDS.
What to Monitor Every Day
Signal | Healthy | Action if not |
|---|---|---|
Hard bounces | Very low | Stop, re-verify the list (bounce types) |
4xx deferrals | Rare | Hold volume; slow per-provider rate |
5xx policy blocks | None | Pause and investigate (550 5.7.1) |
Spam placement (tests) | Mostly inbox | Reduce volume, check content and auth |
SNDS colour | Green | Yellow/red → step back |
Replies | Steady | Check targeting and copy |
How to Adjust the Ramp
Hold volume for a few days if any signal wobbles.
Step back to the previous level if deferrals or spam placement increase.
Throttle per provider — slow Gmail or Outlook separately if one defers.
Keep it consistent — avoid long gaps that reset momentum.
Never chase targets — the schedule follows the signals, not the calendar.
Before Day One
🧾rDNS / PTR record
IP resolves to a hostname on your domain.
🔐SPF, DKIM, DMARC
Aligned for every sending domain (guide).
👋HELO/EHLO hostname
Matches rDNS.
📝SNDS registration
Access to Microsoft's IP data.
🛑Blocklist check
Make sure the IP starts clean (blacklist tools).
📋Verified list
No guessed addresses (verification).
Server setup details: SMTP server setup and SMTP ports.
Mistakes That Burn New IPs
🚀Starting at full volume
The classic mistake.
📦Warming with an old purchased list
Bounces and traps undo progress.
🔁Identical content to everyone
Looks automated (why emails go to spam).
🧊Pausing for weeks
Reputation fades without consistent sending.
🌐One domain carrying everything
Spread across domains (domain setup).
Alternatives to Warming Your Own IP
If you don't have steady volume or someone to monitor the IP daily, consider mainstream inboxes and pre-warmed inboxes instead of a new dedicated IP. Provider options: dedicated IP email providers. For a fast start: launch a campaign in one day.
Warm IPs Still Need the Basics
IP warming sits on top of these:
🔐Authenticate every domain
SPF, DKIM and DMARC aligned (authentication guide, Google Workspace setup, Microsoft 365 setup).
🌐Use secondary sending domains
Keep your main domain out of cold outreach (domain setup, domain risks).
🔥Warm or start pre-warmed
Ramp gradually (warm-up guide) or use pre-warmed inboxes (pre-warmed vs fresh).
📉Keep per-inbox volume low
Scale with inboxes, not volume (safe sending limits, inbox sizing).
✅Verify every list
Bounces damage reputation fast (verification tools, list cleaning).
📊Monitor weekly
Spam rate, bounces and blocklists (Postmaster setup, blacklist tools).
No IP to Warm? Start Pre-Warmed
LiteMail | Skip the IP ramp
Fresh from $2.50/inbox
Official Google Workspace and Microsoft 365 inboxes for outreach
LiteMail provisions official Google Workspace and Microsoft 365 inboxes on secondary domains, configures SPF, DKIM and DMARC automatically and lists dedicated US and EU IPs. Pre-warmed domains come with 12 weeks of send history, so you can begin from established assets rather than a cold IP.
Strengths | Keep in mind |
|
|
Explore pricing, the inbox calculator, infrastructure, bulk inboxes and setups for agencies, SaaS and recruiters. Comparing providers? See Google Workspace vs Microsoft 365.
Spend your first month selling, not ramping. Get Pre-Warmed Inboxes →
Frequently Asked Questions
What is an IP warming schedule?
A plan for gradually increasing daily volume on a new sending IP to build reputation.
How long does IP warming take?
Often several weeks, depending on target volume and how providers respond.
How many emails should I send on day one?
A small amount — tens to low hundreds — to your best, verified contacts.
Is there an official IP warming schedule?
Mailbox providers don't publish one for cold email; ramp based on your own signals.
Do I need IP warming with Google Workspace?
No. You warm inboxes and domains; Google owns the IPs.
What should I monitor during IP warming?
Bounces, deferrals, policy blocks, spam placement, SNDS data and replies.
What if deferrals increase?
Hold or reduce volume, and throttle the affected provider.
Can I warm an IP with cold email only?
Yes, carefully and slowly, using your best-fit verified contacts first.
Start Warm, Stay Warm
Official Google Workspace and Microsoft 365 inboxes with automated SPF, DKIM and DMARC on dedicated US and EU IPs.
Automated DNS · Pre-warmed options · OAuth export
About LiteMail — LiteMail provides fresh and pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach, with automated SPF, DKIM and DMARC setup, dedicated US and EU IPs, separate client workspaces and one-click OAuth export to Instantly, Smartlead, Lemlist and other sending tools. View pre-warmed inbox plans →
Related reading: Domain Warm-Up Guide · Safe Sending Limits · Blacklist Tools · Postmaster Setup · Pre-Warmed vs Fresh · Pre-Warmed Domains


