
SMTP error codes are the receiving server's way of telling you why a message wasn't accepted. Each error has a three-digit reply code (like 550) and usually an enhanced status code (like 5.1.1) plus a text explanation. The first digit is the most important: 4 means a temporary problem the sender should retry; 5 means a permanent failure that needs action. This guide explains how to read SMTP error codes, lists the common 4xx and 5xx errors senders see from Gmail and Microsoft 365, and gives the right response for each — with a cold email lens on what each code says about your reputation.
SMTP Error Codes: The Short Answer
First digit | Meaning | Sender action |
|---|---|---|
2xx | Success | None |
3xx | More input needed (mid-conversation) | None — part of normal SMTP |
4xx | Temporary failure | Retry later; slow down if widespread |
5xx | Permanent failure | Fix the cause; don't retry as-is |
Google's admin help explains that codes starting with 4 are temporary failures and codes starting with 5 are permanent failures that need action (About SMTP error messages).
Anatomy of an SMTP Error
Example: 550 5.1.1 The email account that you tried to reach does not exist.
Part | Example | Meaning |
|---|---|---|
Reply code | 550 | Mailbox unavailable / action not taken |
Enhanced status: class | 5 | Permanent |
Enhanced status: subject | .1 | Addressing |
Enhanced status: detail | .1 | Bad destination mailbox |
Text | does not exist | Human-readable explanation |
Common enhanced status subjects: x.1 addressing, x.2 mailbox, x.3 mail system, x.4 network/routing, x.5 protocol, x.7 security or policy.
Common 4xx (Temporary) Errors
Code | Typical meaning | What to do |
|---|---|---|
421 4.7.0 | Connection or reputation-related deferral | Retry later; reduce rate to that provider |
421 4.7.26 (Gmail) | Rate limited because message unauthenticated | Fix SPF/DKIM (guide) |
450 4.2.1 | Recipient receiving mail too quickly | Retry later |
451 4.3.0 | Temporary server rejection | Retry |
452 4.2.2 | Recipient mailbox full | Retry; suppress if repeated |
452 4.5.3 | Too many recipients | Fewer recipients per message |
Persistent 4xx deferrals are early reputation warnings — see soft bounce vs hard bounce.
Common 5xx (Permanent) Errors
Code | Typical meaning | What to do |
|---|---|---|
550 5.1.1 | Address doesn't exist | Remove address; verify lists |
550 5.7.1 | Rejected by policy | |
550 5.7.26 / 5.7.x (Gmail) | Authentication or policy failure | Check SPF, DKIM, DMARC alignment |
550 5.7.515 (Outlook.com) | Domain doesn't meet high-volume authentication requirements | Pass SPF and DKIM, publish aligned DMARC |
550 5.7.233 (Microsoft 365) | Tenant external recipient rate limit exceeded | Reduce external sending |
550 5.1.8 (Microsoft 365) | Sender restricted for suspected spam | Admin review and release |
554 5.7.x | Blocked, often reputation or content | Check blocklists (removal) |
References: Google's Gmail SMTP errors and codes, Microsoft's NDR reference for Exchange Online, Microsoft 5.7.515 guide and tenant rate limits.
Authentication-Related Errors in 2026
Gmail and Outlook.com now enforce authentication requirements for bulk senders, so authentication-related codes are more common than before. If you see 4.7.26, 5.7.26 or 5.7.515-style errors, check that SPF passes, DKIM signs with your domain, and DMARC is published and aligned. For Microsoft 365 client submission, also note Microsoft's ongoing retirement of Basic authentication for SMTP AUTH (updated timeline) — see SMTP server setup.
What SMTP Errors Tell Cold Emailers
Pattern | Likely meaning | Response |
|---|---|---|
Many 5.1.1 | Bad list | Verify before sending (tools) |
Rising 421/4.7.x deferrals | Reputation slipping | Lower volume, check placement |
5.7.x policy blocks | Authentication or blocklist issue | Fix auth, check blocklists |
Errors on one inbox only | Inbox-level problem | Pause and rest that inbox |
Errors across all inboxes | Domain or list problem | Stop and diagnose |
A Simple Bounce-Handling Workflow
Export bounces with full codes from your sequencer.
Group by code class (4xx vs 5xx) and by inbox/domain.
Remove 5.1.x addresses permanently.
Investigate 5.7.x policy errors immediately.
Let isolated 4xx retry; throttle if widespread.
Recheck after changes; document what fixed it.
More: bounce rate fix and mid-campaign drop fixes.
Prevent Errors at the Source
Most SMTP errors in cold email trace back to these basics:
🔐Authenticate every domain
SPF, DKIM and DMARC aligned (authentication guide, Google Workspace setup, Microsoft 365 setup).
🌐Use secondary sending domains
Keep your main domain out of cold outreach (domain setup, domain risks).
🔥Warm or start pre-warmed
Ramp gradually (warm-up guide) or use pre-warmed inboxes (pre-warmed vs fresh).
📉Keep per-inbox volume low
Scale with inboxes, not volume (safe sending limits, inbox sizing).
✅Verify every list
Bounces damage reputation fast (verification tools, list cleaning).
📊Monitor weekly
Spam rate, bounces and blocklists (Postmaster setup, blacklist tools).
Fewer Errors From Day One
LiteMail | Authenticated inboxes out of the box
Fresh from $2.50/inbox
Official Google Workspace and Microsoft 365 inboxes for outreach
LiteMail provisions official Google Workspace and Microsoft 365 inboxes on secondary domains, configures SPF, DKIM and DMARC automatically and lists dedicated US and EU IPs. Automated DNS removes the most common cause of authentication-related errors.
Strengths | Keep in mind |
|
|
Explore pricing, the inbox calculator, infrastructure, bulk inboxes and setups for agencies, SaaS and recruiters. Comparing providers? See Google Workspace vs Microsoft 365.
Start with authentication done right. Get Pre-Warmed Inboxes →
Frequently Asked Questions
What do SMTP error codes mean?
They're server responses explaining why mail wasn't accepted; 4xx are temporary and 5xx are permanent.
What's the difference between 4xx and 5xx errors?
4xx errors are temporary and retried; 5xx errors are permanent and need a fix.
What is an enhanced status code?
The x.y.z code (like 5.1.1) giving class, subject and detail of the error.
What does 550 5.1.1 mean?
The recipient address doesn't exist.
What does 421 4.7.26 mean in Gmail?
Gmail rate limited the message because it wasn't authenticated with SPF or DKIM.
What does 550 5.7.515 mean?
Outlook.com rejected the message because the sending domain doesn't meet required authentication.
Should I retry 5xx errors?
Not without fixing the cause.
What SMTP errors should worry cold emailers most?
Rising 5.7.x policy blocks and widespread 4xx deferrals, which signal reputation problems.
Clean Setup, Clean Delivery Logs
Official Google Workspace and Microsoft 365 inboxes with automated SPF, DKIM and DMARC on dedicated US and EU IPs.
Automated DNS · Pre-warmed options · OAuth export
About LiteMail — LiteMail provides fresh and pre-warmed Google Workspace and Microsoft 365 inboxes for cold email outreach, with automated SPF, DKIM and DMARC setup, dedicated US and EU IPs, separate client workspaces and one-click OAuth export to Instantly, Smartlead, Lemlist and other sending tools. View pre-warmed inbox plans →
Related reading: Bounce Rate Fix · Outlook Troubleshooting · SPF, DKIM and DMARC · Blacklist Removal · Deliverability Recovery · Google Workspace Inboxes


